产品详情
  • 产品名称:灌封密封环氧树脂及硅胶

  • 产品型号:灌封密封环氧树脂及硅胶
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
灌封密封环氧树脂及硅胶常温固化电子灌封胶:应用于变压器、整流器、电容、滤波器、互感器、驱动器、点火器、点火线圈、电源控制器、水族水泵、节电模块、LED灯饰、LED护栏灯、LED灯条灯串、LED模块、抄表模块、负离子发生器、电子门锁、氙气灯(HID)、增光器、磁力锁、电子感应模块等,主要起到灌封保密,绝缘保护、防水防潮的作用,该系列产品分为*型、阻燃型、*阻燃型等规格
详情介绍:

灌封密封环氧树脂及硅胶
常温固化电子灌封胶:应用于变压器、整流器、电容、滤波器、互感器、驱动器、点火器、点火线圈、电源控制器、水族水泵、节电模块、LED灯饰、LED护栏灯、LED灯条灯串、LED模块、抄表模块、负离子发生器、电子门锁、氙气灯(HID)、增光器、磁力锁、电子感应模块等,主要起到灌封保密,绝缘保护、防水防潮的作用,该系列产品分为*型、阻燃型、*阻燃型等规格;灌封胶的颜色主要有黑色、灰色、白色、透明等,其它颜色可根据实际需要作调配;灌封胶还分为软质和硬质两种类型,该系列产品均在常温情况下自然固化,固化后表面平整、光泽好、无气泡、电气特性优、绝缘强度高。

加温固化电子灌封胶:应用于高压变压器、霓虹灯变压器、高压包、回扫变压器、点火线圈、负离子发生器、高压电源、高压模块等产品,主要起到灌封保密,绝缘保护、防水防潮的作用,该系列产品分为*型、阻燃型、*阻燃型等规格;灌封胶的颜色主要有黑色、灰色、白色、透明等,其它颜色可根据实际需要作调配,该系列产品均需加温固化,加温的温度与时间依不同的产品有不同的要求,此类产品比常温固化型的灌封胶耐温更好、绝缘强度更高。

LED封装专用环氧胶:本品为发光二极管(LED)专用封装胶水,混合后粘度低、流动性好、易消泡、可使用时间长,固化后收宿率小、耐湿性佳、耐温高、透光率优、有很好的光泽、硬度高。

数码管、点阵专用封装胶:本品为数码管、点阵显示器等(LEDDisplay)、发光显示器专用封装胶水,混合后粘度低、流动性好、易脱泡、可使用时间长、易于操作;固化后收宿率小、耐湿性佳、耐温高、透光均匀、硬度高。

太阳能电池板封装胶:应用于太阳能电池板、太阳能电池组件、LED灯饰面板及其它工艺品表面的封装,该产品表面效果极好、无气泡、无波纹、耐黄变性能优。

蓄电池中盖密封胶、极柱胶:应用于免维护铅酸蓄电池(槽盖)中盖的粘接密封以及正负极端子的密封,如汽车蓄电池、摩托车蓄电池、太阳能蓄电池、电动车蓄电池、船舶用蓄电池、矿山用蓄电池、应急灯蓄电池等行业均可使用,该产品固化速度快、粘接性能优、耐酸性能好。

LED埋地灯、防水灯密封胶:用于地埋灯、水底灯、防水灯、LED灯饰等产品的灌注密封和防水保护,其密封性能优异、耐冷热性能好。

温度保险丝、热保护器粘接胶:应用于温度保险丝、玻管保险丝、热保护器、温控器、电流保险丝,起到粘接封装的作用。

 

  

 

主要产品选择指南
KEY PRODUCT SELECTOR

硅胶 Silicone

A、 双组分加成固化硅胶 Addition Cure

型号

Product

性能描述

Primary Benefits

特性指标

Characteristics

RTVS 8127LV

低粘度,易浇注的灌封材料,高导热性,简单的混合比,UL94V-0认证,广泛应用于精密电子、电气产品的灌封、密封上。
Low viscosity, Easily pourable pottingmaterial,Features high thermal conductivity, convenient mix ratioand has aUL Flame Rating of 94V-0, useful for pottingdelicateelectronic/electrical parts.

深灰色Dark Gray
粘度 Viscosity:
4,000cps
硬度 Hardness:60A
混合比 Mix Ratio:1:1

RTVS 3-95-1

极高的导热性和绝缘性,优良的高温运用范围,UL94V-0认证,能满足电子机械和航天、航空工业的需要。
Extremely highly thermal conductivityanddielectric strength, excellent for high temperature, has a ULFlameRating of 94V-0, useful in electric, mechanical andairborne,aerospace industry.

红色Red
粘度 Viscosity:
10,000cps
导热率 Thermal Conductivity:
1.442w/m.K
耐温 Service Temperature:260℃

 RTVS 61

低粘度,自熄性,用于零件的粘合与防震需要,极高的透明高使得密封材料的检查和修复显而易见。
Low viscosity, Self-extinguishing RTVSiliconecompound, used in situations where component identificationandvibration shock protection is needed, The transparencypermitsvisual inspection for easy identification and repairofencapsulated parts.

透明Transparent
粘度 Viscosity:
4,500cps
硬度 Hardness:35A
混合比 Mix Ratio:1:1

RVTS920

低粘度,室温固化成透明凝胶,固化后的凝胶对于精密电子组件有着良好的机械缓冲和减振作用,且具有低温性能。
Low viscosity, cures at room temperature toatransparent gel, The cured gel state provides excellentmechanicalcushioning and vibration damping for delicateelectronicassemblies.

透明Transparent
粘度 Viscosity:
750cps
混合比 Mix Ratio:1:
1
耐温 Service Temperature: -115℃~200℃

RTVS 570

低粘度,易浇注的灌封材料,并在不需要底涂的情况下能获得较好的粘接性,操作时间长,耐高温,需加热固化。
Low viscosity, Easily pourable pottingmaterial,With the ability to develop good adhesion to mostsubstrateswithout the use of a primer, Has a long working time andhightemperature resistance, Cure at elevatedtemperature.

黑色Black
粘度 Viscosity:
3,000cps
混合比 Mix Ratio:1:
1
操作时间 Working Tme:24小时

B、 双组分缩合固化硅胶 Condensation Cure

型号

Product

性能描述

Primary Benefits

特性指标

Characteristics

RTVS 42

CurtisⅡ

独特的低粘度硅酮化合物,能与大多数金属及胶料进行良好的粘接并具有独特的低温性能,是专业为高温、低吸水性、高绝缘性设计制造的。
It’s unique chemistry combines the lowtemperatureperformance characteristics heretofore found only insilicones withthe excellent encapsulating properties of epoxies,formulated towithstand severe thermal shock, low moistureabsorption andexcellent dielectric insulation.

黑色Black
粘度 Viscosity:
16,000cps
硬度 Hardness:75A
耐温 Service Temperature: -55℃~125℃

RTVS 11

低粘度,有着出色的电气性能,广泛地应用为高压灌封化合物和精密电路密封化合物,可与多种催化剂使用,可改变灌胶时间、固化时间、混合比率以及固化条件。
Low viscosity, Excellent electricalproperties,Used extensively as a high voltage potting compound aswell as anencapsulating compound for delicate circuitry, Can beused withvarious curing agents, thus varying pot life, cure time,mix ratiosand cure conditions.

白色White
粘度 Viscosity:
12,000cps
硬度 Hardness:45A
耐温 Service Temperature: -55℃~204℃

RTVS 49

易浇注的RTV硅胶灌注化合物,高导热,固化成稳固又有弹性的橡胶体,能持续耐温260℃,短时间耐温315℃,用于需散热的电子设备。
Pourable RTV Silicone potting/casting compoundwithhigh thermal conductivity, Cures to firm but flexiblerubber,capable of withstanding temperatures of 260℃ continuous and315℃short term exposure, uses in electronic devices requiringheatdissipation.

红色Red
粘度 Viscosity:
50,000cps
硬度 Hardness:75A
耐温 Service Temperature: -55℃~260℃

RTVS 16

通用灌封密封化合物,可用来保护电子元器件、组件以及精密系统等,有着优良的电气性能,低温弹性高温坚固,可根据不同的固化情况来选择固化剂。
Multi-purpose casting/encapsulating, pottingandsealing compound, used successfully to protectelectroniccomponents, assemblies and delicate systems, Exhibitsexcellentelectrical properties, low temperature flexibility andhightemperature stability, A variety of catalysts are availablefordifferent cure situations.

红色Red
粘度 Viscosity:20,000-30,000cps硬度 Hardness:60A
耐温 Service Temperature: -55℃~260℃

RTVS 51

低温弹性,易浇注的RTV密封硅胶,可与多种固化剂使用,可改变灌胶时间、固化时间、混合比率以及固化条件。
Low temperature flexible, easily pourableRTVSilicone sealant/encapsulant, can be used with a wide varietyofcuring agents, thus varying pot life, cure time, mix ratiosandcure conditions.

淡黄色或白色Buff or White
粘度 Viscosity:
12,000
硬度 Hardness:50A
耐温 Service Temperature: -115℃~232℃

 

环氧树脂 Epoxy

A、 双组分环氧树脂 Two-Part Systems

型号

Product

性能描述

Primary Benefits

特性指标

Characteristics

Insulcast 116FR

易浇注的灌封材料,简单的混合比率,UL94V-0认证,广泛应用于通常的设计与制造。
Easily pourable casting material, theconvenientmixing ratio, has a UL Flame Rating of 94V-0, for generalpurposecasting and impregnation.

黑色Black
粘度 Viscosity:
8,100cps
硬度 Hardness:
75D
混合比 Mix Ratio:1:1

Insulcast 333(9)

低粘度,具有自熄特点易浇注的环氧树脂灌封密封化合物,UL94V-0认证,用于精密组件的灌封密封上。
Low viscosity, self-extinguishing, easilypourable,epoxy potting/casting compound, which is recognized underthecomponent program of Underwriters Laboratories'' Flame Class94V-0,used for delicate assemblies.

黑色Black
粘度 Viscosity:
3,000cps
硬度:
85D
耐温 Service Temperature:155℃

Insulcast 140 (9)  

高粘度,高填充环氧树脂,有着良好的电气性能,高导热,低热膨胀。
High viscosity, highly filled epoxyformulationwhich, in addition to having excellent electricalproperties, hasunusually high thermal conductivity with lowthermalexpansion.

黑色Black
粘度 Viscosity:
12,000cps
硬度 Hardness:
90D
混合比 Mix Ratio:100:
3-4
导热系数:10BTU-in/(ft2)(hr)(℉)

Insulcast 501 (9)

无填充料的环氧树脂,透明,低粘度,通用的涂覆灌注材料,有着优良的物理及电气性能。
Unfilled clear epoxy with low viscosity forgeneralpurpose casting and impregnation, exhibiting excellentelectricaland physical properties.

透明Clear
粘度 Viscosity:
3,000cps
硬度 Hardness:85A
耐温 Service Temperature:105℃

Insulcast 504 (8)

无填充料、高透明、极低粘度的环氧树脂灌注材料,具有优良的物理、电气性能。
Very low viscosity, Unfilled clear epoxyresincasting or impregnating material, has excellent physicalandelectrical properties.

透明Clear
粘度 Viscosity:
175-200cps
硬度 Hardness:
75-80D
耐温 Service Temperature:105℃

Insulcast 985FR

半弹性、中高粘度、阻燃环氧化合物,具有出色的抗热冲击性能,运用了***的聚合物与填充技术,在较大的温度范围内也能保持良好的电气性能。
Semi-flexible, moderate viscosity, flameretardantepoxy compound displaying the best thermal shockresistancecurrently available in an epoxy compound, as well asexcellentelectrical properties over a wide range of temperature,Insulcast985FR makes use of the latest polymer andfillertechnology.

黑色Black
粘度 Viscosity:
50,000cps
硬度 Hardness:
70D
耐温 Service Temperature: -55℃~155℃

Insulcast 986

半弹性加热固化环氧化合物,在很大的温度范围内都能保持良好的物理、电气性能。
Semi-flexible, heat cure epoxy compoundthatexhibits excellent electrical and physical properties over awiderange of temperatures.

透明Clear
粘度 Viscosity:
6,000cps
硬度 Hardness:
65D
耐温 Service Temperature: -55℃~155℃

Insulcast 987

半弹性灌封化合物,在很大的温度范围内都能保持良好的物理、电气性能。
Semi-flexible, potting compound thatexhibitsexcellent electrical and physical properties over a widerange oftemperatures.

颜色Neutral
粘度 Viscosity:
60,000cps
硬度 Hardness:
65D
耐温 Service Temperature: -55℃~155℃

Insulcast 1751

低成本,易使用的室温固化环氧灌封化合物,简单的混合比,固化后形成坚固的塑胶体可满足大多数电子、电气的灌封密封需要。
Low cost, easy to use room temperature curingepoxypotting and casting compound, with a mix ratio of 1 to 1 byvolume,the cured epoxy is a tough rigid plastic that is highlysuited tomost electrical or electronic potting andencapsulatingapplications.

黑色Black
粘度 Viscosity:
17,000cps
体积比 Mix Ratio:1:
1
硬度 Hardness:70D

Insulcast 3230LV

低粘度,高填充环氧树脂,有着出色的电气性能,高导热性,低热膨胀,比Insulcast140的粘度更低。
Low viscosity, highly filled epoxyformulationwhich, in addition to having excellent electricalproperties, hasunusually high thermal conductivity with low thermalexpansion,similar to Insulcast 140 but lowerviscosity.

黑色Black
粘度 Viscosity:
6,000cps
硬度 Hardness:
90D
耐温 Service Temperature:105℃

B、 单组分加热固化环氧树脂 One-Part Systems (Heat Cured)

型号

Product

性能描述

Primary Benefits

特性指标

Characteristics

Insulcast 771

透明的低粘度单组分加热固化环氧树脂,坚硬,高抗热性。
Clear, low viscosity, one-component, rigid,heatcure epoxy system which exhibits highheatresistance.

透明Black
粘度 Viscosity:
700cps
硬度 Hardness:
88D
耐温:-40℃~155℃

Insulcast 781

透明的单组分加热固化环氧,弹性,专为低粘度、*小热压的灌封浇注要求而设计。
Clear, one-component, flexible, heat cureepoxysystem designed for coil impregnation, and pottingapplicationsrequiring low viscosity and minimal thermalstress.

透明Clear
粘度 Viscosity:
1,350cps
硬度 Hardness:
40D
耐温 Service Temperature: -55℃~155℃

姓名:
电话:
您的需求:
 

川公网安备 51011402000152号